Konceptualno rješenje 3D toranjskog simulatora

master's thesis

• Title (english): Conceptual Solution of a 3D Tower Simulator
• Author: Željko Lipanović
• Mentor: Biljana Juričić (mentor)
• Committee member: Tomislav Radišić (predsjednik povjerenstva)
• Committee member: Bruno Antulov-Fantulin (član povjerenstva)
• Committee member: Petar Andraši (član povjerenstva)
• Granter: University of Zagreb; Faculty of Transport and Traffic Sciences; (Division of Aeronautics); (Department of Aeronautics); Zagreb
• Defense date and country: 2024-09-27, Croatia
• Scientific / art field, discipline and subdiscipline: TECHNICAL SCIENCES; Traffic and Transport Technology; Air Traffic

Abstract

Danas je proces školovanja kontrolora zračnog prometa postao gotovo nemoguć bez
upotrebe simulatora. Nekoć je izrada simulatora bilo skup i zahtjevan posao koji su mogli
priuštit samo neki školski centri, ali danas je računalna tehnika toliko napredovala da je
simulator moguće izraditi korištenjem uobičajenih računalnih komponenti koje se mogu kupiti
u bilo kojoj trgovini računalne opreme. U ovom radu je opisan proces izrade jednog manjeg i
jeftinijeg 3D toranjskog simulatora pogodnog za korištenje u obrazovnim institucijama. U radu
su detaljno opisani tehnički aspekti izrade simulatora, uključujući računalni hardver,
komunikacijski sustav, namještaj i ostalu potrebnu opremu. Dodatno, procijenjeni su ukupni
troškovi za nabavu i izradu potrebne opreme. Koristeći simulatorski softver 9A-SIM opisan je
proces izrade točaka, ruta i vježbi. Opisane su moguće praktične primjene jednog ovakvog
simulatorskog sustava u budućnosti.

Abstract (english)

Today, the process of training air traffic controllers has become almost impossible
without the use of simulators. In the past, creating a simulator was an expensive and demanding
job that only some school centres could afford, but today computer technology has advanced
so much that it is possible to create a simulator using common computer components that can
be purchased at any computer hardware store. This paper describes the process of making a
smaller and cheaper 3D tower simulator, suitable for use in educational institutions. The paper
describes in detail the technical aspects of making the simulator, including computer hardware,
communication system, furniture and other necessary equipment. In addition, the total costs for
the acquisition and production of the necessary equipment were estimated. Using the simulator
software 9A-SIM, the process of creating points, routes and exercises is described. Possible
practical applications of such a simulator system in the future are described.

• Keywords: 3D simulator; toranjski simulator; monitor; pozicija; kontrolor zračnog prometa; vježbe; pseudo-pilot
• Keywords (english): 3D simulator; tower simulator; monitor; position; air traffic controller; exercises; pseudo-pilot
• Language: croatian
• URN:NBN: urn:nbn:hr:119:259806
• Study programme: Title: Aeronautics; Study programme type: university; Study level: graduate; Academic / professional title: sveučilišni/a magistar/magistra inženjer/inženjerka aeronautike (sveučilišni/a magistar/magistra inženjer/inženjerka aeronautike)
• Type of resource: Text
• File origin: Born digital
• Access conditions: Open access
• Created on: 2024-11-29 13:10:54